# How to set up Auto reply

1\)  head to 

<https://thebristolcable.org/webmail>\
\
2 ) then click the autoreponderes button here:\
![](/files/SW7UWQNPwiBq7AjsmxfQ)

3\) you can then add a new or edit an old one, in this case i'll add a new

4\) add in the message to be sent

You can use the place holders and if you want to do some HTML in you auto reply talk to Mat as thats not easy in this interface.&#x20;

* i would suggest 12 hours as the interval to minimise us spamming mainly each other.&#x20;
* The From box is your name all most certainly

<figure><img src="/files/6dUJr2IFM6QNEG1MnddD" alt=""><figcaption></figcaption></figure>

### !IMPORTANT!

5\) When you return from holiday don’t forget disable or you can set it to end at a certain time when you are back so you do'nt need to!

there is also a guide here <https://go.cpanel.net/Autoresponders>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://handbook.thebristolcable.org/staff-guides/email-guide/auto-reply.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.